NIBR-LTSi is a selective LATS kinase inhibitor activating YAP signaling and expanding tissue stem cells in vitro and in vivo.

The YAP/Hippo pathway is an organ growth and size regulation rheostat safeguarding multiple tissue stem cell compartments. LATS kinases phosphorylate and thereby inactivate YAP, thus representing a potential direct drug target for promoting tissue regeneration. Here, we report the identification and characterization of the selective small-molecule LATS kinase inhibitor NIBR-LTSi. NIBR-LTSi activates YAP signaling, shows good oral bioavailability, and expands organoids derived from several mouse and human tissues. In tissue stem cells, NIBR-LTSi promotes proliferation, maintains stemness, and blocks differentiation in vitro and in vivo. NIBR-LTSi accelerates liver regeneration following extended hepatectomy in mice. However, increased proliferation and cell dedifferentiation in multiple organs prevent prolonged systemic LATS inhibition, thus limiting potential therapeutic benefit. Together, we report a selective LATS kinase inhibitor agonizing YAP signaling and promoting tissue regeneration in vitro and in vivo, enabling future research on the regenerative potential of the YAP/Hippo pathway.

Cell adhesion molecule KIRREL1 is a feedback regulator of Hippo signaling recruiting SAV1 to cell-cell contact sites.

The Hippo/YAP pathway controls cell proliferation through sensing physical and spatial organization of cells. How cell-cell contact is sensed by Hippo signaling is poorly understood. Here, we identified the cell adhesion molecule KIRREL1 as an upstream positive regulator of the mammalian Hippo pathway. KIRREL1 physically interacts with SAV1 and recruits SAV1 to cell-cell contact sites. Consistent with the hypothesis that KIRREL1-mediated cell adhesion suppresses YAP activity, knockout of KIRREL1 increases YAP activity in neighboring cells. Analyzing pan-cancer CRISPR proliferation screen data reveals KIRREL1 as the top plasma membrane protein showing strong correlation with known Hippo regulators, highlighting a critical role of KIRREL1 in regulating Hippo signaling and cell proliferation. During liver regeneration in mice, KIRREL1 is upregulated, and its genetic ablation enhances hepatic YAP activity, hepatocyte reprogramming and biliary epithelial cell proliferation. Our data suggest that KIRREL1 functions as a feedback regulator of the mammalian Hippo pathway through sensing cell-cell interaction and recruiting SAV1 to cell-cell contact sites.

Electrospun tube reduces adhesion in rabbit Achilles tendon 12 weeks post-surgery without PAR-2 overexpression.

One great challenge in surgical tendon repair is the minimization of peritendinous adhesions. An electrospun tube can serve as a physical barrier around a conventionally sutured tendon. Six New Zealand White rabbits had one Achilles tendon fully transsected and sutured by a 4-strand suture. Another six rabbits had the same treatment, but with the additional electrospun DegraPol tube set around the sutured tendon. The adhesion formation to the surrounding tissue was investigated 12 weeks post-operation. Moreover, inflammation-related protease-activated receptor-2 (PAR-2) protein expression was assessed. Finally, rabbit Achilles tenocyte cultures were exposed to platelet-derived growth factor-BB (PDGF-BB), which mimicks the tendon healing environment, where PAR-2 gene expression was assessed as well as immunofluorescent staining intensity for F-actin and α-tubulin, respectively. At 12 weeks post-operation, the partially degraded DegraPol tube exhibited significantly lower adhesion formation (- 20%). PAR-2 protein expression was similar for time points 3 and 6 weeks, but increased at 12 weeks post-operation. In vitro cell culture experiments showed a significantly higher PAR-2 gene expression on day 3 after exposure to PDGF-BB, but not on day 7. The cytoskeleton of the tenocytes changed upon PDGF-BB stimulation, with signs of reorganization, and significantly decreased F-actin intensity. An electrospun DegraPol tube significantly reduces adhesion up to twelve weeks post-operation. At this time point, the tube is partially degraded, and a slight PAR-2 increase was detected in the DP treated tendons, which might however arise from particles of degrading DegraPol that were stained dark brown. PAR-2 gene expression in rabbit tenocytes reveals sensitivity at around day 10 after injury.

Delineation of the healthy rabbit liver by immunohistochemistry - A technical note.

Liver diseases pose a big global health problem and liver failure may result from viral infection, overnutrition or tumors. Studying pathologic liver tissue demands for accurate and specific histological stainings and immunohistochemical labellings, including chromogenic and fluorescent approaches. Moreover, a reliable set of healthy liver stainings and labellings are required, to provide a baseline or reference for the pathological situation. Here, we used the liver tissue of a healthy rabbit and compared different histological key steps, such as paraffin embedding after formalin fixation versus cryopreservation; or an antigen retrieval (AR) step in processing paraffin sections versus the same procedure without AR; or chromogenic with fluorescent detection system, respectively. Moreover, we provide images of serial sections, where we stained the same morphological structure with different markers, including collagen I, collagen III, fibronectin, α-SMA, elastin, protease-activated receptor-2 (PAR-2) which is an inflammation-related marker, ki67 for proliferating cells, and orcein (as negative control for pathological aberrations like Wilson disease). Differences between conditions were quantitatively assessed by measuring the colour intensity. Generally, we observed that cryosections exhibited a stronger signal intensity in immunohistochemically labelled sections than in paraffin sections; however, the strong staining got slurred, which sometimes hampered proper identification of morphological structures at higher magnifications. Moreover, there was a clear increase in signal intensity for paraffin sections when an AR step was performed compared to condition without AR. Results for mouse isotype staining as a negative control clearly supported those findings. Different stainings of the portal triad, the central vein and the bile ducts revealed a clear-cut distribution of extracellular matrix components, with prominent fibronectin and elastin around the lumen of the central vein as well as a patchy PAR-2 expression. As for the bile ducts, complete absence of α-SMA and PAR-2 was found at the margins, however, collagen I expression and elastin were positive and showed a strong signal. Like this, we provide useful and valuable reference images for researchers using the rabbit liver model. It may help to decide which of the immunohistochemical protocols are valuable to reach a certain aim and which protocols lead to the best visualization of the target structure.

Delineation of the healthy rabbit lung by immunohistochemistry - a technical note.

Investigation and studies of pulmonary diseases and injuries require pre-clinical animal models. The rabbit lung model is widely used and allows for a diverse set of readouts. Among them, histology and immunohistochemistry are of invaluable merit because qualitative and quantitative information about tissue morphology and composition can be easily obtained. In this technical note, we performed several histological and immunohistochemical stainings in the rabbit healthy naïve lung tissue. Overnight formalin fixation with subsequent paraffin embedding was compared to cryopreservation with a subsequent 10-minute formalin fixation prior to staining. Antigen retrieval (AR) for paraffin embedded sections proved to enhance the corresponding signals compared to analogous staining without AR. Advantages and disadvantages of chromogenic versus immunofluorescence stainings were discussed. In addition, several morphological structures, such as the intrapulmonary bronchus with its mucosal folds, the pulmonary artery, the alveoli and the lymph nodes, were stained with various stainings at the same site in order to give a comprehensive picture of their composition. Besides Haematoxylin&Eosin and Elastica van Gieson staining, collagen I, collagen III, fibronectin, α-SMA, ki-67 and protease-activated receptor-2 (PAR-2) immunohistochemistry was performed. Collagen I, collagen III and fibronectin expression was positive at the outer rim of the pulmonary arteries, while the inner rim was collagen III positive. Moreover, the fibronectin staining in the intrapulmonary bronchus showed an opposite trend when compared to the collagen III staining. The alveoli exhibited PAR-2 expression, while PAR-2 was not expressed in lymph nodes of the healthy rabbit lung.

Supporting Cell-Based Tendon Therapy: Effect of PDGF-BB and Ascorbic Acid on Rabbit Achilles Tenocytes in Vitro.

Cell-based tendon therapies with tenocytes as a cell source need effective tenocyte in vitro expansion before application for tendinopathies and tendon injuries. Supplementation of tenocyte culture with biomolecules that can boost proliferation and matrix synthesis is one viable option for supporting cell expansion. In this in vitro study, the impacts of ascorbic acid or PDGF-BB supplementation on rabbit Achilles tenocyte culture were studied. Namely, cell proliferation, changes in gene expression of several ECM and tendon markers (collagen I, collagen III, fibronectin, aggrecan, biglycan, decorin, ki67, tenascin-C, tenomodulin, Mohawk, α-SMA, MMP-2, MMP-9, TIMP1, and TIMP2) and ECM deposition (collagen I and fibronectin) were assessed. Ascorbic acid and PDGF-BB enhanced tenocyte proliferation, while ascorbic acid significantly accelerated the deposition of collagen I. Both biomolecules led to different changes in the gene expression profile of the cultured tenocytes, where upregulation of collagen I, Mohawk, decorin, MMP-2, and TIMP-2 was observed with ascorbic acid, while these markers were downregulated by PDGF-BB supplementation. Vice versa, there was an upregulation of fibronectin, biglycan and tenascin-C by PDGF-BB supplementation, while ascorbic acid led to a downregulation of these markers. However, both biomolecules are promising candidates for improving and accelerating the in vitro expansion of tenocytes, which is vital for various tendon tissue engineering approaches or cell-based tendon therapy.

Elastic and surgeon friendly electrospun tubes delivering PDGF-BB positively impact tendon rupture healing in a rabbit Achilles tendon model.

A major problem after tendon laceration is the low mechanical strength of the repaired tissue. One viable strategy for improving the functional and biomechanical properties of ruptured and repaired tendons is the delivery of growth factors at the injury site. Here, bioactive and reversibly expandable double-layered emulsion and coaxially electrospun tubes made from biodegradable DegraPol® (DP) (polyester urethane), delivering platelet-derived growth factor BB (PDGF-BB), are explored as implants to improve tendon healing in a rabbit Achilles tendon full laceration model. In vitro studies showed that both emulsion and coaxially electrospun scaffolds allow sustained delivery of bioactive PDGF-BB with similar release kinetics (150-190 pg PDGF-BB/mg of DP scaffold) over a period of 30 days. In vivo assessment after three weeks showed that PDGF-BB delivery through the bioactive DP tubes increased the tensile strength of the treated tendons 2-fold without additional pro-fibrotic effects, i.e., cell hyperproliferation or increase in α-smooth muscle actin expression at the wound site. While no major differences in ECM composition at the wound site were observed for ± PDGF-BB treated samples, collagen I and III were upregulated and fibronectin was downregulated compared to native tendons. In areas away from the wound, increased fibronectin expression was observed qualitatively in regions with lower collagen I and III expression. Both types of bioactive DP tubes provided surgeon-friendly and stable implants to deliver bioactive molecules and positively affected the strength of the repaired tendons after 3 weeks, thus presenting promising bioactive implants for clinical applications in the tendon repair field.

Impact of PDGF-BB on cellular distribution and extracellular matrix in the healing rabbit Achilles tendon three weeks post-operation.

Current methods for tendon rupture repair suffer from two main drawbacks: insufficient strength and adhesion formation, which lead to rerupture and impaired gliding. A novel polymer tube may help to overcome these problems by allowing growth factor delivery to the wound site and adhesion reduction, and by acting as a physical barrier to the surrounding tissue. In this study, we used a bilayered DegraPol® tube to deliver PDGF-BB to the wound site in a full-transection rabbit Achilles tendon model. We then performed histological and immunohistochemical analysis at 3 weeks postoperation. Sustained delivery of PDGF-BB to the healing Achilles tendon led to a significantly more homogenous cell distribution within the healing tissue. Lower cell densities next to the implant material were determined for +PDGF-BB samples compared to -PDGF-BB. PDGF-BB application increased proteoglycan content and reduced alpha-SMA+ areas, clusters of different sizes, mainly vessels. Finally, PDGF-BB reduced collagens I and III in the extracellular matrix. The sustained delivery of PDGF-BB via an electrospun DegraPol® tube accelerated tendon wound healing by causing a more uniform cell distribution with higher proteoglycan content and less fibrotic tissue. Moreover, the application of this growth factor reduced collagen III and alpha-SMA, indicating a faster and less fibrotic tendon healing.

Impact of UV sterilization and short term storage on the in vitro release kinetics and bioactivity of biomolecules from electrospun scaffolds.

To effectively translate bioactive scaffolds into a preclinical setting, proper sterilization techniques and storage conditions need to be carefully considered, as the chosen sterilization technique and storage condition might affect the structural and mechanical properties of the scaffolds, as well as the bioactivity and release kinetics of the incorporated biomolecules. Since rarely tested or quantified, we show here in a proof-of-concept study how these parameters are affected by UV sterilization and one week storage at different temperatures using bioactive electrospun DegraPol scaffolds that were specifically designed for application in the field of tendon rupture repair. Even though UV sterilization and the different storage conditions did not impact the morphology or the physicochemical properties of the bioactive scaffolds, UV sterilization caused significant attenuation of the growth factor release kinetics, here platelet derived growth factor (PDGF-BB) release (by approx. 85%) and slight decrease in ascorbic acid release (by approx. 20%). In contrast, 4 °C and -20 °C storage did not have a major effect on the release kinetics of PDGF-BB, while storage at room temperature caused increase in PDGF-BB released. All storage conditions had little effect on ascorbic acid release. Equally important, neither UV sterilization nor storage affected the bioactivity of the released PDGF-BB, suggesting stability of the bioactive scaffolds for at least one week and showing potential for bioactive DegraPol scaffolds to be translated into an off-the-shelf available product. These parameters are expected to be scaffold and protein-dependent.

Cellular self-assembly into 3D microtissues enhances the angiogenic activity and functional neovascularization capacity of human cardiopoietic stem cells.

While cell therapy has been proposed as next-generation therapy to treat the diseased heart, current strategies display only limited clinical efficacy. Besides the ongoing quest for the ideal cell type, in particular the very low retention rate of single-cell (SC) suspensions after delivery remains a major problem. To improve cellular retention, cellular self-assembly into 3D microtissues (MTs) prior to transplantation has emerged as an encouraging alternative. Importantly, 3D-MTs have also been reported to enhance the angiogenic activity and neovascularization potential of stem cells. Therefore, here using the chorioallantoic membrane (CAM) assay we comprehensively evaluate the impact of cell format (SCs versus 3D-MTs) on the angiogenic potential of human cardiopoietic stem cells, a promising second-generation cell type for cardiac repair. Biodegradable collagen scaffolds were seeded with human cardiopoietic stem cells, either as SCs or as 3D-MTs generated by using a modified hanging drop method. Thereafter, seeded scaffolds were placed on the CAM of living chicken embryos and analyzed for their perfusion capacity in vivo using magnetic resonance imaging assessment which was then linked to a longitudinal histomorphometric ex vivo analysis comprising blood vessel density and characteristics such as shape and size. Cellular self-assembly into 3D-MTs led to a significant increase of vessel density mainly driven by a higher number of neo-capillary formation. In contrast, SC-seeded scaffolds displayed a higher frequency of larger neo-vessels resulting in an overall 1.76-fold higher total vessel area (TVA). Importantly, despite that larger TVA in SC-seeded group, the mean perfusion capacity (MPC) was comparable between groups, therefore suggesting functional superiority together with an enhanced perfusion efficacy of the neo-vessels in 3D-MT-seeded scaffolds. This was further underlined by a 1.64-fold higher perfusion ratio when relating MPC to TVA. Our study shows that cellular self-assembly of human cardiopoietic stem cells into 3D-MTs substantially enhances their overall angiogenic potential and their functional neovascularization capacity. Hence, the concept of 3D-MTs may be considered to increase the therapeutic efficacy of future cell therapy concepts.

A Simple Modification Method to Obtain Anisotropic and Porous 3D Microfibrillar Scaffolds for Surgical and Biomedical Applications.

In native tissues, cellular organization is predominantly anisotropic. Yet, it remains a challenge to engineer anisotropic scaffolds that promote anisotropic cellular organization at macroscopic length scales. To overcome this challenge, an innovative, cheap and easy method to align clinically approved non-woven surgical microfibrillar scaffolds is presented. The method involves a three-step process of coating, unidirectional stretching of scaffolds after heating them above glass transition temperature, and cooling back to room temperature. Briefly, a polymer coating is applied to a non-woven mesh that results in a partial welding of randomly oriented microfibers at their intersection points. The coated scaffold is then heated above the glass transition temperature of the coating and the scaffold polymer. Subsequently, the coated scaffold is stretched to produce aligned and three dimentional (3D) porous fibrillar scaffolds. In a proof of concept study, a polyglycolic acid (PGA) micro-fibrillar scaffold was coated with poly(4-hydroxybutirate) (P4HB) acid and subsequently aligned. Fibroblasts were cultured in vitro within the scaffold and results showed an increase in cellular alignment along the direction of the PGA fibers. This method can be scaled up easily for industrial production of polymeric meshes or directly applied to small pieces of scaffolds at the point of care.

Hybrid Randomly Electrospun Poly(lactic-co-glycolic acid):Poly(ethylene oxide) (PLGA:PEO) Fibrous Scaffolds Enhancing Myoblast Differentiation and Alignment.

Cellular responses are regulated by their microenvironments, and engineered synthetic scaffolds can offer control over different microenvironment properties. This important relationship can be used as a tool to manipulate cell fate and cell responses for different biomedical applications. We show for the first time in this study how blending of poly(ethylene oxide) (PEO) to poly(lactic-co-glycolic acid) (PLGA) fibers to yield hybrid scaffolds changes the physical and mechanical properties of PLGA fibrous scaffolds and in turn affects cellular response. For this purpose we employed electrospinning to create fibrous scaffolds mimicking the basic structural properties of the native extracellular matrix. We introduced PEO to PLGA electrospun fibers by spinning a blend of PLGA:PEO polymer solutions in different ratios. PEO served as a sacrificial component within the fibers upon hydration, leading to pore formation in the fibers, fiber twisting, increased scaffold disintegration, and hydrophilicity, decreased Young's modulus, and significantly improved strain at break of initially electrospun scaffolds. We observed that the blended PLGA:PEO fibrous scaffolds supported myoblast adhesion and proliferation and resulted in increased myotube formation and self-alignment, when compared to PLGA-only scaffolds, even though the scaffolds were randomly oriented. The 50:50 PLGA:PEO blended scaffold showed the most promising results in terms of mechanical properties, myotube formation, and alignment, suggesting an optimal microenvironment for myoblast differentiation from the PLGA:PEO blends tested. The explored approach for tuning fiber properties can easily extend to other polymeric scaffolds and provides a valuable tool to engineer fibrillar microenvironments for several biomedical applications.

Bioactive, Elastic, and Biodegradable Emulsion Electrospun DegraPol Tube Delivering PDGF-BB for Tendon Rupture Repair.

Healing of tendon ruptures represents a major challenge in musculoskeletal injuries and combinations of biomaterials with biological factors are suggested as viable option for improved healing. The standard approach of repair by conventional suture leads to incomplete healing or rerupture. Here, a new elastic type of DegraPol® (DP), a polyester urethane, is explored as a delivery device for platelet-derived growth factor-BB (PDGF-BB) to promote tendon healing. Using emulsion electrospinning as an easy method for incorporation of biomolecules within polymers, DegraPol® supports loading and release of PDGF-BB. Morphological, mechanical and delivery device properties of the bioactive DP scaffolds, as well as differences arising due to different electrospinning parameters are studied. Emulsion electrospun DP scaffolds result in thinner fibers than pure DP scaffolds and experience decreased strain at break [%], but high enough for successful surgeon handling. PDGF-BB is released in a sustained manner from emulsion electrospun DP, but not completely, with still large amount of it being inside the polymeric fibers after 30 d. In vitro studies show that the bioactive scaffolds promote tenocyte proliferation in serum free and serum(+) conditions, demonstrating the potential of this surgeon-friendly bioactive delivery device to be used for tendon repair.